Loading... Please wait...


Our Newsletter

MDV-10-08 Install Parts Bag for DEL Ozone AOP 25 (previously Solar Eclipse) Inground Swimming Pool Ozone and UV-C Generator - OPTIONAL

  • MDV-10-08 for Solar Eclipse up to 25,000 Gallons (SEC-50-01/AOP-25)
12.00 LBS
Calculated at checkout

Product Description

The Mixing Degas Vessel MDV-10-08 is an optional parts bag for the DEL Ozone Solar Eclipse In-ground Swimming Pool Ozone and UV Generator to 25,000 Gallons.

The MDV-10-08 Mixing Degas Vessel eliminates visible ozone bubbles in the pool.  When water flow from the pool plumbing enters the MDV-10-08, the ozone bubbles float up and accumulate at the top; pool water is pushed out of the bottom then re-mixed with the main body of water.  The separated ozone (bubbles) passes through a float valve and is sent through a carbon destruct.  The carbon destruct neutralizes ozone before safely venting off into the atmosphere.

The MDV-10-08 allows for a higher concentration of ozone to be used on pools and spas.  It prevents ozone bubbles from returning to the pool, eliminating bubble noise and visibility.  Click on Installation and Operations Manual link below for full details.

The MDV-10-08:

  • Gets more ozone into the water (higher ozone dissolution)
  • Eliminates unused ozone (in the form of bubbles) from returning to the pool
  • Eliminates the potential of ozone reacting with pool components such as covers, fittings, or surfaces
  • Prevents bubbles from gathering under the cover or inside the plumbing
  • Utilizes a Granulated Activated Carbon (GAC) Carbon Destruct Cartridge (9-0620) that destroys ozone off-gas removed by the MDV.  Replace 9-0620 annually

 Examples of MDV-10-08 applications are:

  • Vinyl Pools
  • Indoor Pools
  • In-Ground Spas
  • Water Features
  • Reflection Pools
  • Pools with an Automatic Cover
  • Water Containing Fish or Wildlife
  • Plumb the MDV-10-08 at least 4' downstream from the Solar Eclipse to allow for proper sanitation
  • The MDV-10-08's inlet and outlet fittings are 3/4" FNPT; use the correct fittings to plumb into the circulation loop
  • The Exhaust Tube will release small amounts of condensation and carbon under normal operation.  AVOID STAINS: route the Exhaust Tube to divert the condensation to a suitable location (into a planter bed, for example)
  • If the Exhaust Tube (which comes off 9-0620 Carbon Destruct) develops a slow drip, Valve Assembly (Brass fitting off the top of MDV-10-08) may need service
RESOURCE CENTER | Download the following here:
MDV-10-08 Installation and Operations Manual

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!