Loading... Please wait...


Our Newsletter

Bio-Active Cyanuric Acid Reducer

  • Bio-Active 8 oz. Residential Strength
  • Bio-Active 16 oz. Commercial Strength
  • Bio-Active Cyanuric Acid Reducer
0.08 LBS
Calculated at checkout

Product Description

New and Advanced!!!  Bio-Active cyanuric acid reducer is a powerful blend of all-natural microorganisms, enzymes and co-factors specifically optimized for clarification of fresh water and salt water pools, and is compatible with normal chlorine levels.  Delivered in active microbial form, these biocatalysts are freeze-dried in powder and will reactivate upon mixing with water.  

Bio-Active's unique blend of biocatalysts converts organic wastes into harmless nitrogen and carbon dioxide gas which escape into the air, and unlike harmful chemicals, leaves no residuals that damage the environment.  Bio-Active is packaged as a dry powder format ready for dosing into a body of water.  Upon release, it is delivered in a live microbial culture that creates a range of enzymes and co-factors which rapidly remove nutrients.  Product application is easy. Simply pour the required dosage directly into your skimmer box while running your filter.  Run the filter for a minimum of two to four hours after dosing for best results.

  • Advanced biocatalyst technology
  • Allows sanitizers to be effective again
  • Nontoxic, non-allergenic, nonpolluting
  • Use 1 bag (8 oz.) for up to 25,000 gallons 
  • Use 1 bag (16 oz.) for commercial up to 50,000 gallons
  • Eliminates chlorine lock due to high cyanuric acid levels
  • No need to drain your pool due to high cyanuric acid levels
Usage Requirements and Reminders

Since Bio-Active uses natural cultures to reduce your CYA, be sure your pool will be habitable for the the organisms to do their job. When using Bio-Active keep your pool in these ranges:

  • Chlorine between 2-5 ppm
  • PH between 7.2-7.8
  • Alkalinity 80-120 ppm
  • Water temperature between 65°F - 105°
In addition to providing livable ranges for the active ingredient to thrive in, make sure you take note of the information below to get the most out of each dosage:
  • Do not add shock or algaecides 7 days prior to application
  • Works best in an outdoor pool, uncovered for at least 7 days
  • Bio-Active does not work in mineral system pools. Make sure your pool is free of algae or other contaminants
  • Be sure to shut off UV, ozone, and chlorine feeders 15 minutes prior to, and 3 hours after, applying Bio-Active
RESOURCE CENTERDownload the following here:
Bio-Active CYA Reducer Booklet
Bio-Active CYA Usage and Testing Guide

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!